Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Lakewood, CA
When a Ghost Controls opener starts acting up on a Lakewood driveway, the problem is rarely just the motor. It’s usually the marine-layer dampness, a leaning property-line post, or heat-weakened battery backup working against the unit. We’re Waverly Gate Repair, an independent Gate repair service specializing in Ghost Controls across Lakewood, and we diagnose the whole setup, not just the control board. Call (866) 925-0168 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm.

Why Lakewood Residents Choose Us for Ghost Controls Service
We’ve worked on Ghost Controls openers sitting on original 1950s steel and wood gates all over Lakewood. That matters because these units behave differently here than they do a few miles closer to the coast. The damp mornings, the Santa Ana heat, and those shared property-line posts all shape how a Ghost Controls system fails and what it takes to fix it right.
Mario Rojas, our owner, grew up near Del Valle Park and has been working gates and access systems in this corner of LA County for going on two decades. He started Waverly Gate Repair in 2013 after years in the trade, and his approach is simple: fix the thing if the fix makes sense, and tell you straight when it doesn’t. That’s the kind of honesty that keeps Lakewood homeowners calling us back.
We’re a gate-only shop. Not a fencing company that also hangs gates, not a general contractor who glances at an opener. Gates are all we do. Your Ghost Controls system, whether it’s an older arm-style operator or a newer battery backup unit, gets looked at by someone who understands both the mechanical side and the electronics.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Lakewood
- Control board corrosion from marine-layer dampness. Ghost Controls housings on original steel posts trap condensation every morning in Lakewood. That moisture fogs the board and causes erratic limit faults or ghost opens where the gate cycles on its own. We open the housing, clean what can be saved, and replace the board when corrosion has gone too far.
- Battery backup failure after Santa Ana heat cycles. The sealed backup batteries in Ghost Controls units degrade faster inland than near the coast. After a couple of hot, dry Santa Ana seasons, the battery can’t hold enough charge, and the gate stalls mid-cycle during an outage. We test the backup under load and swap in a fresh one when it’s done.
- Arm bracket fatigue on swelling wood gates. Lakewood’s original wood gates soak up dampness on those gray mornings, then dry hard in the afternoon sun. The wood swells just enough to make the Ghost Controls arm push against binding hinges, which strips the drive gear or snaps the mounting bracket. We realign the arm, free the hinges, and often reset the post while we’re at it.
- Keypad and remote receiver water intrusion. Pedestal-mounted Ghost Controls keypads sit right in that damp-then-dry cycle we get here. The membrane fogs internally, and suddenly codes get missed or the remote only works from ten feet away. We seal the housing, dry the internals, and replace the keypad or receiver when water has already done its damage.
- Shared property-line post movement. On many original Lakewood tracts, the driveway gate hinges into a post that’s also the neighbor’s fence corner. When that post leans, the Ghost Controls arm binds and the motor fights the gate every cycle. We reset the post properly, which usually means redoing the footing in that expansive clay soil.
Ghost Controls Service in Lakewood: What Local Conditions Mean for Your Equipment
Here’s what makes Ghost Controls work in Lakewood different from almost anywhere else. On the original tracts, the driveway gate hinges into a post set directly at the property line, shared with a neighboring tract home. That post also serves as the fence corner. When Lakewood’s expansive clay soil heaves seasonally, that post leans, and the Ghost Controls arm starts binding against the gate. The motor still runs, but it’s working twice as hard, which is why limit faults and stripped gears show up so often here. You can’t fix that by swapping the control board. The post has to be reset first, then the arm realigned. It’s a condition you almost never see in neighboring Long Beach’s mixed housing stock, and it changes the whole repair sequence. Mario says it plainly: “If I can fix it right, I will. If you need a new one, I’ll tell you that too.” Sometimes that means a new post footing. Sometimes it means the whole gate. We’ll lay it out before any work starts.
Ghost Controls Models & Products We Service in Lakewood
We service Ghost Controls Heavy-Duty Automatic Gate Openers, both single-swing and dual-swing configurations, along with solar-compatible openers that some Lakewood homeowners run on detached garage gates well away from a power source. We’ve done motor repairs, battery backup replacements, hinge and post work, keypad and remote receiver fixes, and full rewiring on these units.
Parts matter. We use Ghost Controls OEM control boards, arms, and batteries when a direct fit is what the repair needs. For brackets and hardware that are known to fatigue, we use quality aftermarket replacements that hold up better in Lakewood’s damp-then-dry conditions. We’ll tell you honestly when a Ghost Controls unit is worth repairing versus replacing with a comparable operator.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Lakewood
No one can quote a Ghost Controls repair over the phone without seeing the gate. Prices are set per job by the written estimate, and that estimate is free. A control board replacement runs less than a full motor rebuild, but factors like post resetting, arm realignment, and battery condition all affect the final number. We quote the price before any work starts, so there’s no invoice surprise at the end.

What you’ll get from our estimate: a clear diagnosis, a line-by-line breakdown of parts and labor, and our honest take on whether the unit is worth fixing. Call (866) 925-0168. The estimate is free, and we answer 24/7.
Serving Lakewood, CA – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Lakewood
The marine layer rolls in overnight and fogs the inside of the Ghost Controls housing, especially on openers mounted to original steel posts. Condensation on the control board causes erratic limit faults and intermittent ghost opens until the unit dries out. That damp cycle also corrodes connections over time. We can diagnose and fix it, usually the same day. Call (866) 925-0168 for an exact quote, estimates are free.
Usually yes, but the gate and post condition determine everything. Original Lakewood steel gates are often rusted thin after decades of marine-layer dampness, and the posts may have settled in that expansive clay. We’ll assess the gate weight, hinge condition, and post plumb before recommending an opener. Some steel gates are fine to retrofit; some need reinforcing first. The estimate is free, so you’ll know before you spend anything.
Unfortunately, it happens here more than near the coast. Santa Ana heat cycles bake the sealed backup batteries inside Ghost Controls units, and repeated high-heat days shorten their life. If your backup no longer holds a charge or the gate stalls when the power dips, the battery likely needs replacement. We’ll test it under load and tell you if it’s the battery or something deeper. Call (866) 925-0168 for a free estimate.
We keep quality replacement keypads and remote receivers that work with Ghost Controls systems, and we can usually get your gate working the same day. If you need a specific part we don’t have on the truck, we’ll tell you exactly when it arrives and schedule the repair for then. We don’t guess on this. Call (866) 925-0168 and we’ll tell you what’s possible.
It might. If the shared post has leaned and needs resetting, that work touches the property line, and we’ll want to talk through access and any necessary agreement with you and your neighbor before we dig. Many Lakewood tracts have this exact setup, so we’re used to coordinating it. If the post is sound and the repair is limited to the Ghost Controls opener on your side, permission usually isn’t needed. We’ll walk you through it at the estimate.
Service Areas Near Lakewood
We serve Lakewood and the surrounding communities, including Garden Grove, Westminster, Cypress, and Artesia. If your Ghost Controls opener is acting up anywhere in this part of LA County, call us and we’ll see if your gate is in our service area.
Book Your Ghost Controls Service in Lakewood Today
Call (866) 925-0168 for a free estimate on your Ghost Controls gate repair in Lakewood. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is often available when you call early.
Written by Mario Rojas, Owner at Waverly Gate Repair, serving Lakewood since 2013.