Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Brea, CA
Gate installation in Brea means planning around a hillside or a flat tract home, because this city has both in equal measure. A wrought iron driveway gate on a Carbon Canyon slope needs different footings and swing clearance than a vinyl privacy gate in a 92821 neighborhood near downtown. We’re Waverly Gate Repair, and gates are the only thing we work on. If you’re deciding between repairing what you have or starting fresh with a new automatic system, call (866) 925-0168 and we’ll give you a straight answer and a free written estimate.
Why Brea Homes Are Different
Brea’s housing stock splits into two distinct generations, and so does the gate work. The flat core, much of it built in the 1960s and 70s, has mid-century single-family homes with short driveways and close side yards. Gates there tend to be lighter, manual swing gates in wood or vinyl, and the repairs are often about hinges pulling out of old posts or wood swelling after winter rain. Those older stucco and wood-frame homes also hide surprises: shallow post footings, rusted hardware behind trim, and gates that were never quite square to begin with.
Then you drive a few miles east into Olinda Village or Carbon Canyon, and the job changes completely. Those hillside custom homes have sloped entries, long runs from the street to the house, and driveway gates that carry real weight. Dry summers and Santa Ana winds bake the soil, winter rains soften it, and the ground moves enough to push gate posts out of plumb. That’s why Brea techs see more dragging swing gates in the hills than anywhere else nearby. Newer developments like Blackstone and La Floresta add another layer: modern automatic driveway gates and privacy gates on planned-community lots with HOA rules about style and height.
What this means in practice is that a gate company serving Brea has to be comfortable with two very different jobs in the same afternoon. A flatland wood gate that binds after rain and a hillside steel gate whose operator is fighting a post that shifted half an inch. Few generalist contractors see enough of either to get fast at both. We do.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Brea Services
Most Brea homeowners call us for one of two reasons: a gate that stopped working, or an electric gate whose operator is failing. Here’s what each involves here.
Gate Repair in Brea
A gate that drags, sags, or won’t latch is usually a hardware problem: hinges, posts, wheels, or a track that has shifted. In Brea, the flat homes in 92821 see more wood swelling and hardware corrosion, while the hills see slope-related post movement. We repair swing gates and slide gates, reset posts that have shifted from soil movement, and replace worn hardware before it becomes a bigger failure. If your gate has stopped behaving, Gate Repair in Brea explains what we check and what it costs. The estimate is free, and the price is set before we start.
Electric Gate Repair in Brea
Electric gates combine the mechanical side with control boards, safety sensors, and operators. When an automatic gate stops responding in a Brea hillside community, the cause could be a bad board, a sensor knocked out of alignment by shifting ground, or an operator that’s been working against a gate that no longer moves freely. We service Electric Gate Repair in Brea across all the major brands, so we never tell you to call the manufacturer. We answer 24/7, and a technician can be dispatched to Brea from 7am to 7pm, Sunday through Friday.
Gate Installation in Brea
Brea is a city of two gate markets. In the flat 1960s and 70s tracts, a new gate is usually about privacy, curb appeal, or containing a dog, and the lot is level enough for a standard swing or slide design. In the hills of Olinda Village and Carbon Canyon, a new driveway gate has to work with slope, erosion, long runs, and often a fire-access rule from the HOA or city. That means deeper footings, careful swing clearance, and an operator sized for a heavier gate. We handle the whole thing from the first measure to the final control board setup. Our full Gate Installation service covers measurement, footing work, gate fabrication or sizing, hardware, and automation if you want it.
Automatic Gate Installation
Signs you need it
A driveway gate you have to get out and hand-open every time, or a gate that already has an operator but one that’s failed beyond sensible repair.
What it costs in Brea
In Brea, automatic gate installation typically runs $2,800 to $8,000, with the operator and full automation included in that range.
How we do it
We measure the opening and slope, stage the gate and operator, set posts to proper footing depth, mount the operator and safety edges, wire the controls, and test the full cycle.
Driveway Gate Installation
Signs you need it
A driveway with old posts that have shifted, a gate that no longer matches the house, or a sloped entry point where a swing gate drags against the grade.
What it costs in Brea
A new driveway gate in Brea typically costs $4,000 to $9,500, with hillside lots on Carbon Canyon or Olinda Village at the upper end because of longer runs and deeper footings.
How we do it
We check the slope and clearance, remove the old gate and hardware, pour new footings sized for the weight and winds, hang and square the gate, and tune the hardware so it closes fully without dragging.
What Gate Installation Costs in Brea
| Item | Typical range in Brea |
|---|---|
| Automatic gate installation | $2,800 – $8,000 |
| Driveway gate installation | $4,000 – $9,500 |
| New gate operator added to existing gate | $600 – $1,800 |
Do I need a permit for a new gate in Brea?
Some Brea hillside communities and HOA-governed neighborhoods require design approval or a permit for a new driveway gate, especially where fire access is involved. We recommend checking with the city or your HOA before the install. We can walk you through what to ask, but the written estimate sets the final price regardless of approvals.
How long does gate installation take in Brea?
Most Brea gate installations are completed in one day for a standard flat-lot gate. Hillside jobs with deeper footings can stretch to two days when concrete needs cure time before we hang a heavy gate. Call (866) 925-0168 for an exact timeline on your site.
Brands We Service in Brea
We work on what you already own. FAAC and BFT boards, a Linear or Viking operator, a Mighty Mule on a ranch-style gate off Carbon Canyon Road: if you have it, we can diagnose it. We carry common control boards, safety edges, and remote kits stocked for fast turnarounds, and we’ll tell you honestly whether a repair or a new operator makes sense. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Brea, CA
| Service | Typical range in Brea |
|---|---|
| Gate repair (minor hardware adjustment) | $90 – $250 |
| Gate repair (major hardware or post reset) | $250 – $600 |
| Electric gate operator replacement | $600 – $1,800 |
| Control board replacement | $250 – $800 |
| Safety sensor replacement | $150 – $400 |
| Automatic gate installation | $2,800 – $8,000 |
| Driveway gate installation | $4,000 – $9,500 |
| Wooden gate repair or replacement | $200 – $1,200 |
Prices in Brea push higher when the job involves a hillside post that has to be dug deeper into unstable soil, or a heavy steel gate that needs a larger operator. Every quote is written, itemized, and agreed before any work starts. You will never get a surprise invoice from us after the fact.
Neighborhoods We Serve in Brea
We run calls across all of Brea, from the older tract streets in 92821 to the gated and ungated hillside drives east of the 57.
- Downtown Brea and the 1960s-70s tract core
- Olinda Village
- Carbon Canyon
- Blackstone
- La Floresta
Response time across most of Brea is roughly an hour from dispatch, with hillside calls in Carbon Canyon adding a little for the drive up. Fast dispatch from 7am to 7pm, Sunday through Friday.
Service Area – Cities Near Brea
In addition to Brea, our technicians cover the surrounding north Orange County area. We take gate repair and installation calls in La Habra, CA, just across the county line, as well as Hacienda Heights, CA, Garden Grove, CA, and Cypress, CA. If you’re in one of these cities and your gate has failed, call us and we will schedule you for the next dispatch window.
Serving Brea, CA – Our Local Coverage Area
We serve Brea and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Brea
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and most Brea locations are about an hour from our crew. A call outside dispatch hours is booked into the next opening, Sunday through Friday. We do not send crews on Saturday, but we answer the phone and schedule for Sunday.
Many Brea developments, especially Blackstone, La Floresta, and the hillside communities, have HOA design standards that cover gate height, material, and sometimes color. We recommend you check with your HOA or the city before installation. We build to the rules you give us, and we will confirm the written price before any work begins.
Yes. Our estimate is free and comes as a written, itemized price. For repair jobs, the price you see is the price you pay. For installation, we walk the site with you so the quote accounts for slope, soils, and access. Call (866) 925-0168 to book a measure.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Brea Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Chris Parker"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Brandon Wong"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Ryan Barrett