Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Lakewood?
Gate repair in Lakewood typically costs $150 to $400 for a hardware or mechanical fix, $250 to $650 for most electric and automated repairs, and $60 to $200 for routine adjustments like hinge tightening or roller replacement. Commercial slide gate repairs and control board replacements run higher, usually $450 to $1,200 depending on the system and the parts involved. Those are honest ranges for the Lakewood market heading into 2026, and the written estimate you get after we look at your gate sets the final price.
Your gate, our only focus. That’s the whole reason we can walk up to a LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule system and give you a straight number instead of a guess. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Estimates are free.
Key Takeaways
- Most residential gate repairs in Lakewood land between $150 and $650.
- Electric and automated gate work costs more because it involves both mechanical parts and electronics.
- The estimate is free and the written price you receive is what you pay.
- Brand-agnostic repair means you won’t be turned away because we “don’t service that brand.”
- Same-day repair is often possible when we have the part.
- Diagnosing the actual failure first is the biggest lever on cost.
Gate Repair Cost Breakdown (2026)
Here’s how the numbers break down by job type for a Lakewood residential or small commercial property. Every range below is an estimate. The written estimate sets the final price.
| Repair Type | Typical Cost Range | Notes |
|---|---|---|
| Hinge, roller, or latch adjustment | $60 – $200 | Common on manual swing and slide gates |
| Sagging gate realignment | $150 – $350 | Depends on post condition and gate weight |
| Wheel, track, or roller replacement on slide gate | $180 – $450 | Labor varies with gate size |
| Electric gate not opening (diagnosis + fix) | $250 – $650 | Depends on whether it’s wiring, a sensor, or the operator |
| Control board replacement | $300 – $700 | Parts and labor both factor in |
| Photocell or safety sensor replacement | $150 – $325 | Common on LiftMaster and FAAC systems |
| Keypad or remote receiver replacement | $120 – $350 | Includes Linear, Viking, and Elite units |
| Gate operator replacement (residential) | $900 – $2,200 | Includes operator, wiring, and calibration |
| Commercial slide gate repair | $450 – $1,200 | Higher for larger gates and higher-cycle systems |
| Full gate installation (new system) | $2,500 – $6,500 | Scope drives the range; we quote after the on-site visit |
Notice the gap between a hinge adjustment and an operator replacement. That gap is why diagnosis matters more than any single price on this table. A gate that won’t open could be a $180 sensor wire fix or a $2,200 operator swap. Knowing which one you’re dealing with before you spend anything is the whole point of having a specialist look at it.
Electric gate systems require a technician who understands both the mechanical and the electronics. Many “gate won’t work” calls turn out to be a mechanical binding problem causing the operator to strain, not an electronics failure at all. Finding that early keeps the bill small.
What Affects Gate Repair Pricing in Lakewood
Lakewood’s housing stock and lot layout play a real role in cost. The city’s stock is largely mid-century homes and post-war builds, many of which have narrow driveways and side-yard gates squeezed between a house and a fence line. Older gate posts on those properties sometimes need re-setting before a new operator can go on, and that adds labor. Here’s what drives price up or down.
- The type of gate. A manual swing gate with a broken hinge is a straightforward job. A slide gate with a failing operator involves track alignment, motor diagnostics, and safety sensors, so it costs more.
- Brand and part availability. We work on what you already have. Some operators use common parts that are easy to source. Others need a specific control board that has to be ordered, which adds time but not always much cost.
- Access to the gate. A gate on a wide driveway with room to work is faster to service than one crammed against a wall, hedges, or a narrow side yard. Labor time reflects that.
- Post and gate condition. A sagging gate that has pulled loose from an aging post needs the post addressed, not just the hinge. That’s a bigger job but it’s the one that actually holds.
- Residential vs. commercial. Commercial systems cycle far more often and take heavier abuse, so they tend to need more substantial repairs and cost more.
- How early it gets caught. A sensor that’s flickering but still working is cheap to replace. A gate that’s been run against a jammed track for weeks usually means stretched hardware and a worn motor.
How to Save on Gate Repair
The most effective way to keep a gate repair bill down is to have it looked at before a small problem turns into a big one. A gate that drags on a worn roller is a roller replacement. Leave that roller alone for months and you’re paying for a stretched operator too.
- Get it diagnosed first. Our estimate is free, and a proper diagnosis tells you exactly what’s wrong before anything gets replaced.
- Don’t guess at the brand. If a generalist handyman tells you a part is hard to find and quotes high “because it’s an odd brand,” call a specialist who works on that brand. We handle LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems.
- Fix the cause, not the symptom. If the operator keeps tripping, it’s not always the operator. A binding gate and a misaligned track put strain on the motor. Fixing the alignment is often cheaper than a motor replacement.
- Handle small issues promptly. Tightening a hinge or replacing a worn roller now runs $60 to $200. Ignoring it until the gate jams can mean track or hardware damage.
- Bundle related work. If two rollers are worn and one hinge is loose, one visit to fix all of it costs less than three separate visits.
Call (866) 925-0168 for a free estimate. We’ll walk the gate, tell you what’s failing and what it will cost to make it right.
Gate Repair vs. Replacement: Which Costs Less in the Long Run?
For most Lakewood gates in decent structural shape, repair costs less than replacement, often by a wide margin. A $400 repair on a gate that’s otherwise sound will nearly always beat a $2,500-plus installation. Replacement makes sense when the gate frame is rusted through, the posts have failed, or the system is so obsolete that parts no longer exist.
Here’s the honest rule of thumb. If the gate frame and posts are solid and the problem is in the hardware or the operator, repair is usually the smarter move. If a gate is sagging badly, the frame is compromised, or you’re facing your third major operator failure on the same system, replacement may be the better spend. Our team will tell you which side you’re on when we’re standing at your gate.
If you already have a gate and want it looked at, start with gate repair. If you want to talk through a new install, we handle that too. One specialist company covers both, so you don’t have to switch vendors mid-project.
Electric Gate Repair Costs in Lakewood: What You’re Paying For
Electric gate repair in Lakewood generally runs $250 to $650 for most residential fixes, with control board and operator replacements pushing higher. The price reflects the fact that automated gates have two systems to diagnose: the mechanical gate itself and the electronics that drive it.
When your automatic gate won’t open, a specialist checks the mechanical side first. Are the hinges tight? Is the track clear? Is the gate dragging? Then the electronics. Is the operator getting power? Are the safety sensors aligned and clean? Is the remote receiver responding? A generalist often skips straight to the electronics, and that’s where costs climb.
Commercial electric gate repair is a different scale. Small commercial property owners and property managers managing tenant or employee access need a gate that opens hundreds of times a day. Those systems use heavier operators like DoorKing units and need a technician who knows the duty cycle and wear points. Commercial slide gate repair typically runs $450 to $1,200.
Electric gate systems carry real safety risks. Moving gates can crush fingers and hands, and operator wiring carries live voltage. We strongly recommend against DIY work on the electrical side. That’s a job for a trained technician.
Can You Fix My Gate the Same Day?
Often, yes. Many common gate repairs, including hinge adjustments, sensor replacements, and remote or keypad issues, can be handled the same day, especially when we have the right part on hand. Control board replacements and operator swaps sometimes need a specific part ordered, which adds a day or two.
You don’t need to know the part number. Give us the symptoms and we’ll tell you what we expect the fix to be and roughly what it will cost. Call (866) 925-0168. We answer 24/7. Fast dispatch runs from 7am to 7pm, Sunday through Friday. Same-day service is often possible. Back to full security fast.
Why a Gate Specialist Costs Less Than You’d Expect
A generalist fencing or handyman company may quote lower on paper, but they often subcontract the electrical work or take several visits to get it right. Each extra visit costs money and time. A gate-only specialist diagnoses the actual fault on the first visit more often, which keeps the total bill down. This is the entire reason Waverly Gate Repair exists.
We’ve been serving residential and commercial customers in the local area since 2013. Thirteen years of gate-only work means we know the common failure points on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. We don’t dabble in fencing or general contracting. Gates are what we do, and that breadth of brand experience means you get real answers for the system you actually own.
Brand-agnostic repair also means you don’t get the “we only service our own brand” line. We work on what you already have. If it’s a Mighty Mule on a residential driveway or a DoorKing on a commercial lot, we can diagnose it and tell you what the fix costs.
What Does a New Gate System Cost in Lakewood?
A new gate installation in Lakewood typically runs $2,500 to $6,500 depending on the gate type, material, and whether it’s manual or automated. Installation includes the gate, the operator if automated, wiring, and calibration. We provide a written estimate after the on-site visit because scope varies so much between a simple manual side gate and a full automated driveway system.
If your existing gate is failing repeatedly, the math on repair vs. replacement changes. We’ll give you an honest read either way. The goal is a gate that works and a security setup that holds, not an upsell.
FAQs – Gate Repair Cost
How much does gate repair cost in Lakewood?
Gate repair in Lakewood typically costs $150 to $400 for basic mechanical fixes, $250 to $650 for most electric and automated repairs, and $450 to $1,200 for commercial slide gate work. The written estimate sets the final price. Call (866) 925-0168 for a free estimate.
Is it cheaper to repair or replace a gate?
Repair is usually cheaper for a gate in good structural shape, often running $150 to $650 versus $2,500 to $6,500 for a new install. Replacement makes sense when the frame is rusted, posts have failed, or parts are unavailable. Call (866) 925-0168 and we’ll tell you which side you’re on.
How much does an electric gate repair cost in Lakewood?
Electric gate repair typically runs $250 to $650 for most residential fixes in Lakewood, and $450 to $1,200 for commercial systems. The price depends on whether the fault is mechanical, electronic, or both. Call (866) 925-0168 for an exact quote.
Can you come today?
Same-day service is often possible, depending on the part and schedule. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 925-0168 to book.
Do you service my gate brand?
Yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Brand-agnostic repair means you won’t get turned away because we “don’t service that brand.” Call (866) 925-0168 with your brand and symptoms.
Is the estimate free?
Yes. The estimate is free and there is no service charge. The written estimate sets the price you pay. Call (866) 925-0168 to schedule.
Do you work on both manual and automated gates?
Yes. We repair and install manual gates and electric or automated gate systems. Whether it’s a broken hinge on a side gate or a failing LiftMaster operator on a driveway gate, we handle both. Call (866) 925-0168.
Get a Free Gate Repair Estimate in Lakewood
A gate that won’t open, drags, or keeps tripping its operator is a security problem first and a cost problem second. We’ll diagnose it, tell you what the fix costs, and get it working again. Call (866) 925-0168 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Lakewood market as of 2026. Waverly Gate Repair offers free estimates – call (866) 925-0168.
Written by the team at Waverly Gate Repair, serving Lakewood since 2013.
What Our Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Chris Parker"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Brandon Wong"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Ryan Barrett