Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Wilmington, CA
Gate installation in Wilmington usually begins with a simple question: is the old gate worth saving, or has the salt air finally won? Most of the homes here were built between the 1940s and 1960s, and many still have their original steel or wood driveway gates. Decades of marine layer and onshore breeze off San Pedro Bay have left hinges fused, posts leaning, and hardware rusting from the inside-out. We install gates that are built for this specific coastal environment, not for a generic California suburb. Call (866) 925-0168 for a free on-site estimate.
Why Wilmington Homes Are Different
Wilmington’s 90744 sits tight against the Port of LA, and that changes gate work in ways inland contractors miss. The marine layer rolls in most mornings, keeping salt-laden moisture on every metal surface. Gates here rust from the inside-out: a hinge can look fine from the street and be nearly seized where the pin meets the leaf. Wood gates swell in the fog, then split when the dry Santa Ana winds arrive. The housing stock compounds it. These are mostly single-story stucco tract homes from the 1940s through 1960s on tight lots, with driveway and pedestrian gates that have cycled through decades of coastal exposure. We see original 1950s steel gates with hinges that have fused completely, and wood pickets that bind against the post in damp weather. Installation in Wilmington means accounting for corrosion-resistant hardware, proper footing depth for the soil, and gate weight that older posts were never designed to carry.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Wilmington Services
Wilmington homeowners and property managers call us for two things more than anything else: a gate that won’t open or close properly, and an electric operator that has stopped responding. Here’s what each involves in this city.
Gate Repair in Wilmington
Most repair calls in Wilmington involve hardware that has rusted, shifted, or seized after years of salt exposure. Hinges bind, latches stop catching, wheels on sliding gates grind against corroded track. We repair the gate you already have rather than pushing a replacement, and we work on steel, wood, and aluminum alike. The typical repair starts with assessing the hardware, the post condition, and how far the corrosion has spread. Sometimes it’s a quick latch adjustment; other times the hinge assembly needs to be cut out and rebuilt. Read more about Gate Repair in Wilmington.
Electric Gate Repair in Wilmington
Electric gates fail differently in Wilmington than they do inland. The damp, salty air accelerates corrosion on control boards, wire connections, and limit switches. An operator that works fine in Lakewood may fail within a year a mile from the harbor. We diagnose the full system, from the motor and gearbox to the safety edges and keypad, and we service equipment from FAAC, BFT, Linear, and Viking, among others. Get the details on Electric Gate Repair in Wilmington.
Gate Installation in Wilmington
Gate installation in Wilmington is about matching the gate to the coastal environment and the era of the home. A 1950s stucco tract house on a tight lot needs a different gate than a newer multi-unit building near the harbor. The salt air and morning fog mean hardware selection matters more than it does in inland LA County. We install gates that stay square, swing freely, and hold their finish through years of marine exposure. If you’re planning a full project, see our Gate Installation hub for the deeper service breakdown.
Driveway Gate Installation
Signs you need it
Your current driveway gate leans, drags on the concrete, or no longer closes evenly, and the posts are too far gone to safely reuse.
What it costs in Wilmington
Driveway gate installation in Wilmington typically ranges from $2,500 to $9,500 depending on the gate width, material, and whether we’re adding an automatic opener.
How we do it
We remove the old gate and hardware, set new posts at the proper depth for the soil type, hang the new gate, and adjust the hinges so it swings clean without sagging.
Automatic Gate Installation
Signs you need it
You want keypad or remote access at the driveway, or your existing manual gate has become a daily hassle you’d rather automate.
What it costs in Wilmington
Automatic gate installation in Wilmington typically falls between $4,500 and $15,000, with the operator, control board, safety edges, and power run as the main cost drivers.
How we do it
We mount the operator to the gate and post, run power and low-voltage wiring, install safety edges and photo eyes, and program your remotes and keypad on site.
What Gate Installation Costs in Wilmington
| Item | Typical range in Wilmington |
|---|---|
| Driveway gate installation | $2,500 – $9,500 |
| Automatic gate installation | $4,500 – $15,000 |
| Gate replacement (same footprint) | $1,800 – $7,000 |
How long does gate installation take in Wilmington?
Most driveway or automatic gate installations finish in one to two days on site. Coastal soil and existing post conditions can add time, and we’ll confirm the schedule in your written estimate.
Do I need a permit for a new gate in Wilmington?
Permit rules vary by project scope and property type. Ask the city’s building department what applies to your address, and we’ll handle the installation details from there.
Brands We Service in Wilmington
We service gate operators and hardware from FAAC, BFT, Linear, and Viking, along with other major brands. Our technicians carry common boards, remotes, and safety edges in the truck, which shortens turnaround on most Wilmington repair visits. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Wilmington, CA
| Service | Typical range in Wilmington |
|---|---|
| Gate repair | $175 – $850 |
| Electric gate repair | $250 – $1,800 |
| Gate opener repair | $225 – $1,300 |
| Control board replacement | $350 – $1,600 |
| Hinge replacement | $160 – $500 |
| Track repair or replacement | $220 – $800 |
| Driveway gate installation | $2,500 – $9,500 |
| Automatic gate installation | $4,500 – $15,000 |
In Wilmington, salt corrosion is the biggest price mover: a control board in a rusted enclosure costs more than one in a protected location, and fused hinges take longer to cut out than clean ones. Every job gets a written estimate before any work starts, so the price you approve is the price you pay.
Neighborhoods We Serve in Wilmington
We work throughout Wilmington, from the residential streets near Avalon Boulevard to the industrial-adjacent pockets of 90744. Most of our visits fall within a quick drive from the harbor area, and we schedule around the traffic patterns that build up near the port throughout the day.
- Wilmington Harbor area
- East Wilmington
- West Wilmington
- Lomita-adjacent Wilmington
- Avalon Boulevard corridor
Service Area – Cities Near Wilmington
Beyond Wilmington, we regularly work with homeowners in Harbor City, CA and Harbor Gateway South, CA, where the same coastal conditions apply. Our team also serves Lakewood, CA, where we’re based, and we take jobs in Watts, CA for property managers handling multi-unit gate systems.
Serving Wilmington, CA – Our Local Coverage Area
We serve Wilmington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Wilmington
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Most Wilmington repair visits are scheduled the same day or the next available opening, depending on when you call and where the job sits on our route.
Some do, especially in the few planned pockets of the city. If an HOA governs your property, we’ll work within their design rules for materials, height, and finish. We’ll ask about any HOA requirements before the estimate.
Yes. Gate and operator work is all we do, so a single visit covers the mechanical hardware and the electric system. You don’t have to call a fencing company for the gate and a separate electrician for the opener.
If your gate is sagging, seized, or refusing to open, call (866) 925-0168. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Your gate, our only focus.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Wilmington Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Adam Vaughn"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Kurt Bennett"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
- Eric Hayes